How to retrofit diesel heating for new energy vehicles ？
Diesel heating is a heating method used in trucks and RVs. Diesel is used as a heat source, and heat is obtained by burning diesel to achieve the purpose of heating. The original heating device of electric vehicles uses heating pipes to replace the heating water tank of gasoline vehicles, and the effect is the same, achieving the function of heating.
However, this heating method consumes the power of the battery, which will have a certain impact on the cruising range. If diesel heating can be installed, it can not only achieve heating, but also improve the cruising range.
New energy vehicle modified diesel heater
1. Remove the bumper first, and then fix the heater to the back of the bumper, the purpose is to avoid traffic accident and damage the heater.
2. Fix the oil pump, install the heater, exhaust and intake pipe and other accessories.
3. Fix the circulating water pump, and then connect the water tank circulation system.
4. Install the fuel tank at the back.
For safety reasons, diesel fuel-based parking heaters are used, because diesel fuel has a high ignition point, consumes less fuel, and can increase battery life.
The general steps for refitting a diesel heater for a new energy vehicle are as above, but the specific modification should be carried out according to the professional master of the repair shop. The original equipment settings of different vehicles are also different, and the judgment should be based on the actual situation. However, after the modification , which can better improve the cruising range and avoid excessive use of the battery.
JUKOOL has both integrated type diesel parking heater and split type diesel parking heater to meet different requirements and mounting space limits. JUKOOL diesel air heater is a heating device driven by a microcomputer-controlled fan and an oil pump. It uses diesel as fuel and air as medium. The fan is used to drive the rotation of the impeller to realize the combustion of diesel in the combustion chamber. The heat is then released through the casing, which is in uninterrupted heat exchange with the flowing air thanks to the external impeller. Ultimately achieves heating of the entire space.
Its main features as below:
Features of Diesel Parking Heaters:
1. Using microcomputer control system, low fuel consumption, low power consumption, quiet operation.
2. 2KW--5KW automatically adjust the power, which can quickly heat the indoor temperature.
3. With automatic constant temperature function, the indoor temperature can be adjusted at will.
4. Automatic diagnosis system, easy to eliminate all faults.
5. With plateau mode, it can be used normally at an altitude of 5200M.
6. With spring and autumn mode, the indoor temperature can be kept constant in spring, autumn and winter.
7. Small size and easy installation.
